Construction Civil
What's on your mind?
DISCLAIMER:
The information we provide on www.constructioncivil.com is for educational or general informational purposes only. All information on the Site is provided in good faith. However, we make no representation or guarantee of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the Site.
Recent Posts:
Enhancement of the in-place properties of the ground/foundation strata by controlled use of techniques suited to the subsoil is known as Ground Improvement Technique. Where a project encounters unfavourable...
DBM Full Form in Road Construction: The Dense Bituminous Macadam (DBM) mix shall be prepared in a Hot Mix Plant (HMP) as per the approved Mix Design, complying with clauses 507.2 and 507.3 of MORTH. The...
Dense Bituminous Macadam is a close-graded premix material with a void content of 5-10 per cent, working as a binder course used for road construction. DBM design should be according to the standard method...
Bitumen emulsion has a vital role towards construction, rehabilitation and maintenance of roads. Emulsions used for road work are cationic slow setting emulsion-1 (CSS1), cationic slow setting emulsion-1h...
What is a Culvert? The culvert is a small cross drainage structure spanning six meters or less between the inner face of the wall. It may be like a bridge designed to allow carrier or pedestrian traffic...
Repair and Strengthening of Bridge Foundation & Substructures
What is Plate Load Test for Soil? Plate load test for soil is conducted to evaluate foundation soil’s safe bearing capacity and settlement, basically for clayey and sandy soils. This method believes...
Different types of defects in concrete are found in various structures, and the reasons for the defects of concrete structures are either physical or chemical processes. The following signs of deterioration...
No posts found
Bridge Construction:
-
Dynamic Load Test on Piles – Objective, Procedure & AnalysisSeptember 21, 2021/
-
Concreting in Construction – Planning and Execution SummaryNovember 18, 2019/
-
Lateral Load Test Pile – General Arrangement & ProcedureSeptember 18, 2021/
-
Acceptance Criteria in Testing of Materials for StructuresMarch 28, 2020/
-
Factors Affecting Strength of Concrete – Construction CivilNovember 29, 2018/
Highway Construction:
-
Subgrade – Steps for Preparation of SubgradeMarch 23, 2020/
-
-
Granular Sub Base Construction and Quality ControlMarch 26, 2020/
-
Construction of Mastic Asphalt for Roads and bridgesSeptember 25, 2020/
-
Dense Bituminous Macadam (DBM) Construction RequirementsMarch 31, 2020/
Bridge Rehabilitation:
-
Rusting of Iron Rebar in Concrete – Special RepairingSeptember 27, 2020/
-
Bridge Inspection Types – Objectives and GuidelinesMarch 24, 2020/
-
Nondestructive Testing of Concrete – Methods & GuidelinesMarch 23, 2020/
-
Blowholes/Surface voids/Bugholes in Concrete SurfaceSeptember 22, 2020/
-
Inspection of Bridges – Procedure & General GuidelinesMarch 22, 2020/
Geotechnical Engineering:
-
Types of Deep Foundation in Civil EngineeringMarch 27, 2020/
-
-
What are Gabions?- Advantages and Construction MethodSeptember 23, 2020/
-
3 Methods of Soil Exploration – Study of Engineering Soil PropertiesNovember 20, 2018/
-
SPT Test for Soil Procedure, Refusal Conditions & Correction:November 20, 2018/
Recant Comments: